2 Wire Hard Wired Smoke Detector

Item #
2W-B

System Sensor i3 Series: 2WT-B with a 135°F fixed thermal sensor

Description: The 2WT-B is a 2-wire, photoelectric i3 smoke detector with a 135°F fixed thermal sensor.

For Use With Vista 15P & 20P 2 Wire Smoke Loops

Item #
2WT-B

4 Wire Hard Wired Smoke Detector

Item #
4W-B

System Sensor i3 Series: 4WT-B with a 135°F fixed thermal sensor

Description: The 4WT-B is a 4-wire, photoelectric i3 smoke detector with a 135°F fixed thermal sensor.

NOTE: Please make sure you add the BK-A77716B 12/24V EOL MODULE FOR 4 WIRE SMOKES Below

Item #
4WT-B

CALL  AGS SECURITY NOW AT (918) 902-8074 TO PLACE ORDER OR FOR OTHER SYSTEM SENSOR MODELS, AVAILABILITY, AND PRICES.

<SYSTEM SENSOR WEB SITE FOR MORE INFO AND DATA SHEETS click on this line>

Item #
BKA77716B

Ademco 5808 Wireless Smoke/Heat Detector

ADEMCO’s powerful 5808LST is a combination wireless photoelectric smoke and heat detector that trips when temperatures reach 135º F. Ideal for difficult to wire locations, situations where room aesthetics are critical, or where hazardous materials exist, the 5808LST provides the ultimate in installation flexibility.

SALE Price: $86.95

Item #
5808LST

5600 Series
Rate of Rise and Fixed Temperature Heat Detectors

The 5600 series detector offers Rate-of-Rise and Fixed Temperature properties, with 135ºF (57ºC) or 194ºF (90ºC) settings, visual indication, Single or Dual circuit options, and normally open contacts, incorporated into an attractive, low profile design.

• Rate-of-Rise and Fixed Temperature, 135ºF (57ºC)
• Applications: Normal temperature fluctuations and ceiling temperatures not exceeding 100ºF (38ºC)

CAUTION:
Where life safety is involved, smoke detectors MUST also be used. Heat detectors should be used for property protection only. Reliance should not be placed soley on heat detectors for life safety. Detectors must not be painted. Heat detectors should be electronically supervised with battery backup at the panel.

Item #
CC601

• Rate-of-Rise and Fixed Temperature, 194ºF (90ºC)
• Applications: Normal temperature fluctuations and ceiling temperatures exceeding 100ºF (38ºC), but not 150ºF (66ºC)

CAUTION:
Where life safety is involved, smoke detectors MUST also be used. Heat detectors should be used for property protection only. Reliance should not be placed soley on heat detectors for life safety. Detectors must not be painted. Heat detectors should be electronically supervised with battery backup at the panel.

CALL  AGS SECURITY NOW AT (918) 902-8074 TO PLACE ORDER OR FOR OTHER SYSTEM SENSOR MODELS, AVAILABILITY, AND PRICES.

<SYSTEM SENSOR WEB SITE FOR MORE INFO AND DATA SHEETS click on this line>

Item #
CC602

ADEMCO’s 5809 wireless fixed heat and rate-of-rise temperature sensor offers expanded fire detection and installation flexibility. It is ideal for hard to wire locations and applications that require more than smoke detection. With no wires to run, the 5809 is fast and easy to install.

• Contains a built-in transmitter which can send alarm, supervisory and battery condition messages to the system’s receiver/control unit
• Powered by a three-volt lithium battery. If the battery voltage gets too low, the 5809 sends a low battery signal to the control panel
• Features a tamper switch, which causes a trouble signal to be sent to the control if the unit is removed from the mounting base

Item #
5809

ESL - 240CO Carbon Monoxide Alarm

The ESL SafeAir?Alarm is the only industrial-grade Carbon Monoxide (CO) alarm specifically developed for use in a monitored home security system. The unit is designed to the same standards as CO sensing systems used to protect workers in industrial plants and hospitals.

The SafeAir alarm’s high reliability makes it an ideal solution for both residential applications and commercial life safety systems. The device has a low, 8mA current draw, so you don’t need to purchase an additional power supply. Its contoured design and small size allow it to blend well with many residential and commercial environments.

The SafeAir alarm operates on a unique industrial-grade electrochemical sensor that continuously monitors for CO and is unaffected by other airborne sub-stances or temperature variations. The sensor communicates with a sophisticated onboard microprocessor that accurately calculates CO levels and exposure time. When compared to other popular CO sensing technologies, the SafeAir detector’s electrochemical technology offers quicker response time, much quicker clearing time, and superior false alarm immunity. Offering stable sensitivity, it has proven to be more reliable over time.
The SafeAir alarm exceeds UL 2075, allowing it to be installed in a wide variety of applications.
 

Item #
ES240COE